ECig Review Time: What Does The Mi-Pod Starter Kit by Smoking Vapor Offer?

With its simplicity, design, and performance, the Mi-Pod, an all-in-one starter kit, has taken the vaping world by storm. The Smoking Vapor Mi-Pod was first introduced in 2008. The device is extremely portable, has a patent-pending OAS (Oil and Air Separated) system, can be used with both refillable and disposable pods, and has three times the battery life of many other pod systems, allowing you more time to enjoy your vaping. It’s a draw-activated device, so even rookie vapers will have no trouble getting the hang of it.

The Mi-overall Pod’s dimensions are 51mm x 12.5mm x 60mm. It resembles a flattened-out JUUL device, tiny enough to fit into a pocket. One side of the device is rounded, while the other is flattened. When you pick it up for a drag, the rounded side fits comfortably in your palm. In your palms, you can almost entirely conceal the device.

If you fancy showing off your vape device when out with friends, then the Mi-Pod is available in the following colors: Silver Metal, Rainbow Metal, Black Metal, Gold Metal, Digital Orange, Digital Black, Digital Blue, and Digital Grey.

A little button and a micro USB port are located on the device’s body. Despite the fact that the Mi-Pod is a draw-activated device, it still has a button for turning it on and off. The device is turned on by five quick clicks of the button. Once the device is turned on, you can use its draw-activated mechanism. When you go in for a draw, you don’t have to keep pressing the button. 

On the side of the device, where the pods reside, there is also a trendy “M” like opening. This allows you to keep an eye on your ejuice level without having to remove the pod. To avoid drawing attention to yourself, the device has a stealth mode. 

Inside the system’s compact casing is a massive 950mAh high-drain Lithium battery with a voltage output of 3-4.2V. That’s more than enough juice to keep you vaping for 24 hours straight. The micro USB connector on the side of the smartphone allows you to swiftly charge the device. That includes a pass-through charge and a 10-second timeout.

On the device, you can see the current state of the device’s battery through a three-light LED ring. When the device’s battery is fully charged, the LED shows Blue, when it is at 50%, and when it is at 0%, it shows Red. There are different voltage outputs depending on how much battery is left in the device. Depending on how much juice is left in the battery, you might expect anywhere from 3.75 to 4.2V. When you’re at 50%, you’ll get 3.4 to 3.7V. As soon as your battery runs out and you need to recharge, you get 3.42 volts (V).

With a 2ml e-juice capacity, it supports both refills and replaceable pods. This means you can replace the top-fill pods with your favorite e-juice without relying on expensive pre-filled pods. As with the Mi pod, Smoking Vapor uses a plastic material, although they have a different design. There is a compartment in the tank for the ejuice, and another for the airflow. The pods are transparent, so you can readily see how much ejuice is left in them, so you know when to refill them and when to stop. It is also possible to see the coil and organic cotton wick used in the pods.

Despite the fact that it is a bottom-filled cartridge, the pod has a hole at the top. To prevent it from falling out, there’s an affixed, non-removable silicon grommet underneath. Easy refilling of pods with e-juice and leak prevention. The pods are designed to give either a loose mouth-to-lung hit or a restricted hit.

Here is what you get in the kit:

  • 1 Mi-Pod System Device
  • 2 Refillable Pod Cartridges
  • 1 Micro USB Charge Cable
  • Instructional Manual
  • 6-Month USA Manufacturer Warranty

The Mi-Pod Starter Kit by Smoking Vapor is sold anywhere from $35.99 on westcoastvapesupply.

Leave a Reply

Your email address will not be published. Required fields are marked *

Search

+